Pick the our controller,
it will be best choice.
Sanup controllers are based on 56 years of accumulated technology.
The biggest characteristic of industrial electrical products is that it is easy and convenient for users to use it based on stable control and quality.
SDM Series
Simple Programmable Controller
FEATURES
2 pattern each 12 segment
Default
Easy to use programmable controller for user who only need simple program control
FUZZY LOGIC Algorithm
Default
For reduction of over shoot, FUZZY control algorithm
Heating and Cooling Control
Default
Control the cooling and heating element simultaneously using two independenct control output
Digital Input
Default
Digital input for program control run/stop, auto/manual control or program control hold etc.
Case Structure for Internal Cooling
Default
Designed with comb-shaped vents to facilitate internal air circulation.
DC Power Supply for Transmitter
Default
17V 30mAdc power supply
Re-transmission Output
Default
4-20mAdc re-transmission for send PV, MV or SV to external system
RS 485 MODBUS
Option
MODBUS Protocol with support demo PC program
SPECIFICATION
1. Power
Voltage: 100-240Vac or 24Vdc (Voltage F.R ±10% less)
Frequency: 50-60Hz
Power Consumption: 최대 10VA less
Isolation: between primary-secondary terminal: 500Vdc 20MΩ more
between secondary-ground terminal: 500Vdc 20MΩ more
between primary-ground terminal: 500Vdc 20MΩ more
Dielectric Strength: between primary-secondary terminal: 2300Vac 50/60Hz 1min.
between secondary-ground terminal: 2300Vac 50/60Hz 1분간
between secondary-ground terminal: 1500Vac 50/60Hz 1min.
2. Input
Universal Input
Input: Thermocouples K J E T C N B R S
RTD JIS Pt100Ω DIN Pt100Ω
Vdc/mAdc 1-5Vdc 0-5Vdc 0-10Vdc (250Ω connected 4-20mAdc 0-20mAdc)
Scan Time: 130ms
Impedance: T.C 1MΩ more
Accuracy: T.C ±0.3% + 1 digit or ±3℃ of big
RTD / Vdc / mAdc ±0.2% + 1 digit
3. Output
Universal output: Relay. SSR. 4-20mA for SCR power controller drive
Relay: 250Vac. 2A (R load)
SSR: 17Vdc Pulse. 20mA max.
Current: 4-20mAdc Max 600Ω less
Alarm: 250Vac. 1A (R load)
4. Control
PID control with Auto-Tuning. PI. PD control. (auto set ARW when PID control mode )
P control with M.R.
ON-OFF control with hysteresis
Heat and cool control
Direct or Reverse control mode
Output limit: Control output high-low limit
Fuzzy Logic overshoot control
Control Period: 1-60초 (not for 4-20mAdc output)
5. Operationg Condition
Temperature: 0-50℃
Humidity: 35-85%RH (no condensation)
Magnetic: 400AT/m less
Warm-Up: Min. 30min. more
6. Storage
-25~70℃ / 5~95%RH (no condensation)
HOW TO ORDER
PANEL CUT SIZE
PANEL CUT SIZE
