SDX4.png

SDX Series

Perfect Timer Included

Call No.for Parameters Call

PWM Control Output

SDX9.png

FEATURES

Wave

FEATURES

CALL Number 

Default

Jump directly by entering the 'Call No.' of the parameter in the setting mode without going to a complicated path for parameter setting

FEATURES

Perfect Timer Included

Default

Timer function included for set to control start and stop time.

Bar Chart

FEATURES

PWM Control Output

Default

SCR. SSR (Random Type). Triac direct driving output. Linear power control like to SCR power controller.

FEATURES

Case Structure for Internal Cooling

Default

Designed with comb-shaped vents to facilitate internal air circulation.

Shadow

FEATURES

Parameter Setting Lock

Default

Parameter setting lock by user set password number for non-necessary parameter change

FEATURES

Heat or Cool Control Mode

Default

Settable control mode change to heat or cool control mode

Square Stage

FEATURES

Power

DC 24V Optional

Default 100~240Vac 50-60Hz. By order 24Vdc enable

SPECIFICATION

1. Power

   Voltage: 100-240Vac or 24Vdc (Voltage F.Rate ±10% under)

   Frenquency: 50-60Hz

   Power Consuption: Max 10VA under

   Isolation: between primary-secondary terminal: 500Vdc 20MΩ over

                     between primary-ground terminal: 500Vdc 20MΩ over

                     between ground-secondary terminal: 500Vdc 20MΩ over

   Dielectric Strength: between primary-secondary terminal: 2300Vac 50/60Hz 1min.

                     between primary-ground terminal: 2300Vac 50/60Hz 1min.

                     between ground-secondary terminal: 1500Vac 50/60Hz 1min.

                 

2. Input

   Input: Thermocouples K J E R T

               RTD DIN Pt100℃

               Vdc/mAdc 1-5Vdc 4-20mAdc 

   Scan Time: 250ms

   Impedance: T.C 1MΩ over

   Accuracy: T.C ±0.3% + 1 digit 또는 ±3℃ of big

                     RTD ±0.2% + 1 digit

3. Output

   Relay: 250Vac. 2A (R load)

   SSR: 17Vdc Pulse. 20mA max.

   Current: 4-20mAdc Max 600Ω less

   Alarm: 250Vac. 1A (R load)

4. Control

   PID control by Auto-Tuning. PI. PD Control. (PID Control, ARW is auto set)

   M.R. included Proportional (P) Control

    ON-OFF Control with Hysteresis

   Reverse or Direct Control Mode

   Output Limit: Settable Output High and Low Limit

   Control Period: 1-60sec. (not for 4-20mA)

5. Operating Condition

   Temperature : 0-50℃

   Humidity: 35-85%RH (No condensation)

   Magnetic: 400AT/m less

   Warm-Up Time: Min. 30min more

6. Storage

   -25~70℃ / 5~95%RH (No condensation)

PARAMETER CALL BY CALL No. 

SDX-call.png

PWM CONTROL OUTPUT

SDX-wire2.png

OUTPUT FORM

SDX-output-form.png

​SSR OUTPUT

PWM OUTPUT

PANEL CUT SIZE

SDX-PCS.png

WIRING

SDX-wire.png

HOW TO ORDER

SDX-HTO.png