1. Power

​

   Voltage: 100-240Vac or 24Vdc (Voltage F.R ±10% less)

   Frequency: 50-60Hz

   Power Consumption: Max 10VA less

   Isolation: between primary-secondary terminal: 500Vdc 20MΩ more

                     between secondary-ground terminal: 500Vdc 20MΩ more

                     between primary-ground terminal: 500Vdc 20MΩ more

   Dielectric Strength: between primary-secondary terminal: 2300Vac 50/60Hz 1min.

                     between secondary-ground terminal: 2300Vac 50/60Hz 1min

                     between secondary-ground terminal: 1500Vac 50/60Hz 1min.

​

2. Input

​

   Universal Input

   Input: Thermocouples K J E T C N B R S

               RTD JIS Pt100Ω  DIN Pt100Ω

               Vdc/mAdc 1-5Vdc 0-5Vdc 0-10Vdc (250Ω connected 4-20mAdc 0-20mAdc)

   Scan Time: 130ms

   Impedance: T.C 1MΩ more

   Accuracy: T.C ±0.3% + 1 digit or ±3℃ of big

                     RTD / Vdc / mAdc  ±0.2% + 1 digit

​

3. Output

​

   Universal output: Relay. SSR. 4-20mA for SCR power controller drive

   Relay: 250Vac. 2A (R load)

   SSR: 17Vdc Pulse. 20mA max.

   Current: 4-20mAdc Max 600Ω less

   Alarm: 250Vac. 1A (R load)

​

4. Control

​

   PID control with Auto-Tuning. PI. PD control. (auto set ARW when PID control mode )

   P control with M.R.

   ON-OFF control with hysteresis

   Heat and cool control

   Direct or Reverse control mode

   Output limit: Control output high-low limit

   Fuzzy Logic overshoot control

   Control Period: 1-60초 (not for 4-20mAdc output)

​

5. Operationg Condition

​

   Temperature: 0-50℃

   Humidity: 35-85%RH (no condensation)

   Magnetic: 400AT/m less

   Warm-Up: Min. 30min. more

​

6. Storage

​

   -25~70℃ / 5~95%RH (no condensation)